top of page

Railroad and Shaft Outer Diameter (OD) Gages

 

Albion's gages incorporate proprietary Temperature Compensation technology to display measurements that represent true dimension at 20° degrees Centigrade, 68° degrees Fahrenheit, the International Reference temperature for measurements, per ISO Standard # 1.

 

The reference temperature of 20 °C (68° Fahrenheit) was adopted by the CIPM (International Committee for Weights and Measures (abbreviated CIPM from the French Comité international des poids et mesures) on 15 April 1931, and became ISO recommendation number One in 1951.

Snap Gage Frames



TComp snap gages are available in 2" variable ranges on frames that enable measuring from 3" - 5" up to 29" - 33".

TComp ("tee-comp") Snap Gages

 

Equipped with Albion's standard TComp II temperature compensating indicator with standard LVDT travel of ± .02 inch (1 mm) and .00001 inch (0.00025mm) resolution before applying temperature compensation.

 

 

TComp II SPECIFICATIONS

  • Measurement range/LVDT travel: ± .02 inch (± 0.5mm)

  • Resolution: 0 .00001 inch, 0.00025 mm

  • Repeatability: ±.0 .00001 inch, 0.00025 mm

  • Storage for up to 19 part/feature definitions

  • Temperature ranges

Environmental: 32°F(0°C) - 125°F(51°C)

Workpiece: 32°F(0°C) - 150°F(65°C)

  • Humidity range: Maximum 95% relative non condensing

  • Response times:

    • 10°F change ‑2.0 secs, flat surface

    • 3.5 secs, curved surface

    • 30°F change ‑2.4 secs, flat surface

    • 5.5 secs, curved surface

​

​

  • Electrostatic discharge: Tested to + 15kv (I.E.C. spec. 801-2, 1984)

  • Communications output: RS-232

  • Controller

    • Weight: 10 oz

    • Size: 3.75"x2.575"x2.375"

  • Touch screen liquid crystal digital display

  • RS232 output available

  • Rechargeable battery or A/C powered

  • User programmable tolerances and much more

bottom of page