Albion Devices Inc temperature compensation. Temperature compensate temp comp T-Comp, GageComp, TrueGage, True Gage, BenchMark. Bench Mark Gage temperature sensors, fixturing, fixture gage repair. Gage service gage maitenance gage service and repair, measuring instrument service measuring instrument repair Measuring instrument maintenance precision fixture height gage gauging precision caliper. Quality assurance, metrology dimensional gaging measuring equipment measurement inspection measuring. CMM probes micrometers dimensional
 

 

Snap Gages

Temperature Compensated Variable Snap Gages

  

TComp snap gages. Equipped with Albion's standard T°Comp 100 temperature compensating indicator with standard LVDT travel of ± .02 inch and .0001 inch resolution (optional .00005 inch resolution, with ± .01 inch LVDT travel). Displays in inch or metric.

Albion Devices, Inc. temperature compensated snap gage. Albion Devices Inc temperature compensation. Temperature compensate temp comp T-Comp, GageComp, TrueGage, True Gage, BenchMark. Bench Mark Gage temperature sensors, fixturing, fixture gage repair. Gage service gage maitenance gage service and repair, measuring instrument service measuring instrument repair Measuring instrument maintenance precision fixture height gage gauging precision caliper. Quality assurance, metrology dimensional gaging measuring equipment measurement inspection measuring. CMM probes micrometers dimensional

Optional size ranges. Available in 2" variable ranges from 3" - 5" up to 23" - 25".

Albion Devices Inc temperature compensation. Temperature compensate temp comp T-Comp, GageComp, TrueGage, True Gage, BenchMark. Bench Mark Gage temperature sensors, fixturing, fixture gage repair. Gage service gage maitenance gage service and repair, measuring instrument service measuring instrument repair Measuring instrument maintenance precision fixture height gage gauging precision caliper. Quality assurance, metrology dimensional gaging measuring equipment measurement inspection measuring. CMM probes micrometers dimensional

Micrometer attachment. Also available with micrometer attachment on opposing anvil, for applications requiring frequent nominal dimension adjustment. A single setting master is all that is required for the entire range of the gage, while the micrometer is used to adjust for difference between size of master and nominal size.

Albion Devices snap gage foot, micrometer arrangement. Temperature compensation for bearing, railroad, RR, and general machine industry

 

Specifications
Resolution to .0001" or .00005" (0.003 or 0.001mm), with measurement range of 40 thousands and 20 thousandths (1mm or 0.5mm) respectively; inch or metric modes; RS232 output available; rechargeable battery or A/C powered; user programmable tolerance lights, liquid crystal digital display, available with protective metal shroud for rough working environments.
 
Measurement range/LVDT travel: ± .02 inch (± 0.5mm)
Resolution: .0001 inch ; .00005 inch or 0.001mm
Repeatability: ±.0001 inch (±0.0025mm)
Temperature ranges
Environmental: 32°F(0°C) - 125°F(51°C)
Workpiece: 32°F(0°C) - 150°F(65°C)
Humidity range: Maximum 95% relative non condensing.
 
Response times
10°F change - 2.0 secs, flat surface
3.5 secs, curved surface
30°F change - 2.4 secs, flat surface
5.5 secs, curved surface
Electrostatic discharge: Tested to + 15kv (I.E.C. spec. 801-2, 1984)
 
Communications output: RS-232, adjustable baud rate from 75 to 4800.
 
Software options: Peak reading; T.I.R.; Custom development also available.
 

TºComp Digital Indicator
  
TºComp 100 is equipped with a .5 inch diameter flat-faced transducer which houses temperature sensors and LVDT in a single unit.

TºComp 110 has separate LVDT and temperature sensing transducers.

 

 

 

Albion Devices Inc temperature compensation. Temperature compensate temp comp T-Comp, GageComp, TrueGage, True Gage, BenchMark. Bench Mark Gage temperature sensors, fixturing, fixture gage repair. Gage service gage maitenance gage service and repair, measuring instrument service measuring instrument repair Measuring instrument maintenance precision fixture height gage gauging precision caliper. Quality assurance, metrology dimensional gaging measuring equipment measurement inspection measuring. CMM probes micrometers dimensional

Copyright Albion Devices, Inc., 2002.