Basic Single Channel GageComp Temperature Compensation system.

Corrects errors caused by temperature in any electronic gage.

Single board system. Packaged without keyboard, LCD and power switch.

Variable resolution to .000005"; inch or metric modes; preset; variable baud rates; outputs all temperature readings, compensated and non-compensated displacement.

Includes:

Controller
Resolution: 12 bit A/D. (1/4096)
For example:
RANGE RESOLUTION
.01" 2µ"
.254mm .062 microns
.001" .2µ"
.0254mm .0062 microns
Mathematical accuracy: IEEE single-point floating; 32 bit precision.
Enclosure dimensions: 9"w x 4"h x 10"d
Weight: 5.5 lbs.
Maximum distance, temperature sensors to controller
Direct connection: 9 feet
RS 232: 50 feet
Input/Output voltage ranges/format:
±2.5v; ±5v; 0 - 2.5v; 0 - 5v.
RS232: Standard ASCII character commands
Format: 8,N,1
Simple protocol permits remote inquiry of GageComps real-time compensation and thermal data, including correction amount or correction factor.

Measurement frequency:
66/second

 Workpiece/Master Temperature sensor

Accuracy, 1°F to 140°F (-17°C to 60°C): .18°F (.1°C)
Response times:
10°F change - 2.0 secs, flat surface
3.5 secs, curved surface
30°F change - 2.4 secs, flat surface
5.5 secs, curved surface
Interchangeable sensors accurate to .5°C without recalibration, to within .1°C with recalibration
Lifetime >5 million activations.

Gage Temperature sensor

Thermistor package

Programming unit
Part # 900102
(required for set-up and
diagnostics only)